Exterior Lighting With No Service Access Is Not a Finished Install

We still get Acworth calls for exterior lighting that nobody can reach without standing in a bed or cutting a holly. The fixtures work until a lamp dies. Then the only path is through finished landscaping. Lighting without service access is not a finished install. It is a callback waiting for the first failure.

Nix Electrical installs and services this work through residential lighting and commercial lighting. Troubleshooting that is not a lamp change sits with residential troubleshooting.

Leave a path a tech can actually use

Photograph the fixtures, the transformer, and how a person would reach them. Low-voltage landscape runs that disappear under mulch need a marker. House-mounted floods need a ladder pad that is not the AC condenser. If a remodel is coming, put lighting access on the same drawing as the panel directory. That directory post is dated August 28.

Coverage includes Marietta and Kennesaw. See service areas.

Controls and wet-location covers still matter

A photocell buried in a soffit you cannot reach will fail the same way. GFCI protection for exterior circuits belongs in the plan, not as a surprise after a rain trip. Related outlet work is on outlet and switch repairs.

What to send

Fixture photos, transformer photos, and whether you can reach them without damaging plants. Call (470) 681-7660 or contact us. More notes sit on the blog.

Put service access in the lighting plan. A pretty install nobody can reach is not done.